A / B Scan Advanced Ultrasonic Thickness Gauge - MVX is a full function A-Scan and B-Scan thickness gauge with a widest variety of modes and features for extra versatility.
The adjustable square wave pulser provides the flexibility necessary for both high resolution and penetration requirements. The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits).
The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring thru-paint and coatings in echo-echo mode.
The time-based B-Scan feature of the MVX displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material.
Built-in hardware AGC gain control for thrupaint measurements in multi-mode operation.
The variety of calibration options is just one more example of MVX’s overall versatility.
The MVX has the ability to store 64 custom user-defined setups. All factory setups can be selected, edited and saved to any setup location.
MVX is equipped with an alpha-numeric data logger to provide increased versatility for those custom reporting needs.
The built-in transducer types offer increased linearity between transducers.
The high speed scan feature speeds up the inspection process by making 32 measurements per second. Remove transducer from the test material and display the minimum measurement scanned.
- Use the visual alarm to set hi and lo limits for applications requiring specific tolerances. If the actual thickness value is above or below the limits, a red light is illuminated.
- Use the find feature to locate the detection point, while automatically adjusting the display to bring the signal into view.
- MVX also comes complete with our Windows® PC software for transferring data to and from a PC.
|Specifications of A / B Scan Advanced Ultrasonic Thickness Gauge - MVX:|
Weight: 13.5 ounces (with batteries).
Pulser: Square wave pulser with adjustable
Receiver: Manual or AGC gain control with
Timing: 20 MHz with ultra low power 8 bit digitizer.
Factory calibration: traceable to national standards.
Warranty: 2 year limited
Three 1.5V alkaline or 1.2V NiCad AA cells. Typically operates for 150 hours on alkaline and 100 hours on NiCad (charger not included.)
Auto power off if idle 5 min.
Battery status icon.
Pulse-Echo Mode: (Pit&Flaw Detection) measures from 0.025 9.999 inches (0.63 to 254 millimeters).
Echo-Echo Mode: Thru Paint & Coatings) measures from 0.1 to 4.0 inches (2.54 to 102 millimeters).
Resolution: +/- .001 inches (0.01 mm)
Single and Two point calibration option, or selection of basic material types.
Units: English & Metric
A-Scan Rectified +/- (flaw view) RF (full waveform view)
B-Scan Cross sectional view.
Large Digits Standard thickness
Scan Bar 6 readings per second. Viewable in B-Scan and Large Digit views.
Repeatability Bar Graph Bar graph
Data Logger (Internal)
12,000 pages of memory (alpha numeric storage).
Page contents: 1 reading and 1 waveform per page.
OBSTRUCT to indicate inaccessible locations.
Memory: 16 megabit non-volatile ram.
Transducer Types: Dual Element (1 to 10 MHz).
Locking quick disconnect “ 00” LEMO connectors.
Standard 4 foot cable.
Custom transducers and cable lengths available for special applications.