C-Frame Presses

Main Features:

• Possibility of punching large sheet metal plates. No need to cut large sheet metal plates into strips for insertion into the punching tool
• Individual tools for each thickness range of the materials can be quickly changed with 90 seconds.

C-Frame Presses with 600kN (60 Tons) Or 1,000 kN (100 Tons) Capacities for sheet metals up to 6mm thickness

Blanking Tool for Flat Specimens

Built-in tool with sided fixing, and T-slot system for quick changing of tools within 2 minutes

O-Frame Presses

Main Features:

• No need to change the tools for each thickness range
• Strips with a width of between 70 - 100mm must be cut out of the sheet metal plates. Large sheet metal plates cannot be inserted into the press.
  

O-Frame Presses with 600 kN (60 Tons), 1,000 kN (100 Tons), 1,500 kN (150 Tons), or 2,000 kN (200 Tons) Capacities for sheet metals up to 8mm thick

3-Fold Blanking Tool for specimens up to 8mm thick

Specimen Grinding System PSM 2000, For high precision tensile specimens

Accurate and reproducible test results highly depends on the precision of tensile specimens preparation.

Blanking is the most efficient and economical method of specimen preparation.

The specimen grinding system removes the cold hardened edge within a short time and guarantees a high accuracy of the specimens.

For further information or to place an order for the Blanking (Punching) Press and Grinding Machine for Metallic Tensile Specimens, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button

To receive our recommendation, please provide us with information about your samples such as:

• Shape of specimen
• Material of sheet metal
• Standard ASTM, JIS, EN, etc.
• Number of Specimens per day
• Minimum & Maximum elongation of the materials
• Dimensions
• Maximum and Minimum thickness
• Maximum tensile strength of your thickest material
• Minimum tensile strength of your thinnest material