Portable Hardness Tester for Testing of Bore Hardness

N6 - Portable hardness tester for testing the hardness of drillings	Portable hardness tester for testing the hardness of drillings All devices consist of test unit N1E 000 (complete with dial gauge, dial gauge cover and spring sleeve) with load lever and Intest sensor with tensioning nut, clamping clip and spring link, including test sample. The standard design consists of load level 62.5, HRC hardness value indicator, device case, hardness comparison table and instruction manual. Application For drilling diameters from 36–110 mm
Operation The testing machine is positioned in the bore and fixed by clamping action.The test load is applied via hand lever. Subsequently the reading is taken from the dial gauge in HRC values.
Applications Hardness testing in bores N6P Internal hardness tester to determine the hardness in bores Measurement value display in HRC Diameter between 36 - 110 mm can be tested

Available Version of Portable Hardness Tester for Testing of Bore Hardness N6P Portable Hardness Tester for Testing of Bore Hardness Intest hardness tester, portable for bores 36 - 110 mm dia. max. insertion depth 400 mm with test unit N1E000 test method HR 62.5 inclu. spring link with diamond dial gauge NMU000 measurement value indication HRC

Technical Specifications for Portable Hardness Tester for Testing of Bore Hardness Model N6P Test loads 613 N 62.5 kgf Peculiarities insertion depth up to 400 mm

Portable Hardness Testers for Metals Main Page

To place an order for N6P - Portable Hardness Tester for Testing of Bore Hardness or more information, please E-mail our sales department at: sales@qualitest-inc.com or call us toll-free at: 1-877-884-TEST.