Automatic Motorized Hardness Testing System - Digi-Test II - Hardness Testing System for Plastics & Elastomers

The most accurate and versatile hardness tester on the market, DigiTest positions itself as the top level Shore/IRHD hardness tester with a modular design to suit virtually every Shore or IRHD hardness measurement scale for Polymers. The automatic test procedure of DigiTest eliminates the operator’s test influence on test procedure and thus always provides the most accurate results.

Depending on the hardness scales of your choice, from any of Shore scales A, A0, B, 0, C, D, D0, 00, 000, 000 S, E, micro Shore A, micro Shore D, C, D0, IRHD/DIDC M, N, H, L, VLRH, you can select the most cost effective combination of required test heads, and expand and upgrade it at any time in the future.

The extensive range of accessories including centering devices, software, as well as Combo Test heads, provide the most comprehensive package for your high precision measurements at a reasonable cost.

New pick-up bracket and new electronic unit

Older test stands and measuring devices can be used with the new pick-up bracket and electronic unit.

Main features

• Electronic unit provides clear display of measured value, navigation menu and Data Output.
• Easy to use with limited operator influence to guarantee accurate and repeatable hardness test results.
• Reading in the display gives assistance for the correct selection of the measuring device during your measurement when the measured value is above or below the limit value.
• USB-interface for data transfer.
• Modular, digital hardness testing system.
• Automatic identification of the measuring range and of the measuring time.
• Integratable in an automatic production process.
• Hysteresis function

Test Method	Range of Application	Standard	Minimum Material Thickness [mm]	Indenter [mm]
Shore A	soft rubber, elastomers, natural rubber products, neoprene, casting resin, polyester, soft PVC, leather, pressure rollers, etc ...	DIN EN ISO 868 ------- DIN ISO 7619, ASTM D 2240, NFT 51-174, BS903 Part. A 26	4 ------- 6
Asker C	see Shore A	SRIS 0101, ABNT NBR 14455	6
Shore A0	see Shore A	DIN ISO 7619 ASTM D 2240	6
Shore A0	see Shore A	DIN ISO 7619 ASTM D 2240	6
Shore D	hard rubber, hard plastics, acrylic glass, polystyrene, rigid thermoplastics, Resopal, pressure rollers, Vinyl plates, cellulose- Acetate, etc ...	DIN EN ISO 868 ------- DIN ISO 7619, ASTM D 2240, NFT 51-174, BS903 Part. A 26	4 ------- 6
Shore B	middle hard materials from rubber, typewriter roles, flat materials	ASTM D 2240	6
Shore C	plastics and middle hard rubber materials	ASTM D 2240	6
Shore D0	plastics and middle hard rubber materials	ASTM D 2240	6
Shore 0	soft elastic materials, pressure rolls, middle firm, textile fabrics, nylon, orlon, perlon, rayon	ASTM D 2240	6
Shore 00	sponge- and foam rubber, cellular rubber, silicone	ASTM D 2240	6
Shore 000	sponge- and foam rubber, cellular rubber, silicone	ASTM D 2240	6
Shore A0 Shore E	see Shore A	DIN ISO 7619 ASTM D 2240	6
Asker CS	see Shore D	SRIS 0101	6
Shore 000 S	see Shore 00 / 000	ASTM D 2240	6
Metal Hardness
Barcol	fibre-glass reinforced plastics, thermosetting plastics, hard thermo-plastics, aluminum	DIN EN 59, ASTM D 2583	1.5

For further information or to place an order for the Automatic Motorized Hardness Testing System - Digi-Test II - Hardness Testing System for Plastics & Elastomers, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button