FALLING / DROP WEIGHT IMPACT TESTER FOR PLASTIC PIPES
» Back to Plastics Testing Equipment Page

Falling / Drop Weight Impact Tester for Plastic Pipes

Falling / Drop Weight Impact Tester for Plastic Pipes

300C (ISO 3127, EN744, EN1411) & 300D (ASTM D2444)

Falling Weight Impact Tester for Plastics Pipes - 300C

Download Falling Weight Impact Tester for Plastics Pipes - 300C PDF Download Falling Weight Impact Tester for Plastics Pipes - 300C PDF

The Falling Weight Impact Tester is used to perform impact tests on plastic pipes, conforming to ISO 3127, EN744 and EN1411. Test pieces are subjected to blows from a falling striker, of specified mass and shape, dropped from a known height onto specified positions around the circumference of the test piece. The true impact rate of the batch, or production run from an extruder, is estimated.

There are two test methods – round-the-clock method and staircase method.

Technical Parameters
  • Working environmental temp.: room temp.
  • Max. falling height: 2000mm
  • Max. lifting speed of the strikers: 12m/min
  • Resolution of displacement: 1mm
  • Height error: +/- 2mm
  • Noses of the strikers: d25 and d90
  • Rs: 50
  • Specimen Length: 300mm
  • Dimensions: 1100mm (D) 600mm (W) 4500mm (H)
  • Weight: 300kg
  • Diameter of test pipes: 10mm-630mm
  • Voltage: 220 VAC/ 50 Hz, single phase or 110 VAC/60 Hz ? Pneumatic air supply: working pressure = 0.4-0.8 MPa
Falling Weight Impact Tester for Plastics Pipes - 300D

It is mainly used to determine of the impact resistance of thermoplastic pipes and fittings under specified conditions of impact by means of a tup (falling weight). Three interchangeable striking noses are used on the tup, differing in the geometrical configuration. Two specimen holders are described.

Technical Parameters
  • Dimensions: 1100mm (D) 610mm (W) 3730mm (H)
  • Weight: 300kg
  • Voltage: 220 VAC/ 50 Hz, single phase or 110 VAC/60 Hz
  • Noses of the strikers: TUP A TUP B TUP C
  • Mass of striker: 2.7 kg, 5.4 kg, 9.1 kg, 13.6 kg
  • Impact height: 50 mm – 2000 mm with display error within +/- 2 mm
  • Diameter of test pipes: 10mm-630mm
  • Specimen Holder:
    • Holder A for Tups A and C
    • Holder B for Tup B for testing fittings

For further information or to place an order for the Falling / Drop Weight Impact Tester for Plastic Pipes, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button

» Back to Plastics Testing Equipment Page