Product Catalogue/Brochure

Foam Pressure Rheometer

The Foam Pressure Rheometer is for the determination of various vulcanization characteristics of different rubber compounds. This series is divided into two machines, the QT-M3000F and the QT-M3000FA.

The Foam Pressure Rheometer - QT-M3000F is able to precisely adjust the gap between upper and lower die freely.

The Foam Pressure Rheometer - QT-M3000FA able to isolate the die’s opening and frame by the sealed ring. The upper and lower die can be completely sealed.

Specifications of Foam Pressure Rheometer
Item QT-M3000F QT-M3000FA
Oscillation Frequency 100cpm
Oscillation Amplitude ±0.5°, ±1°, ±2°, ±3°(Select one angle when placing order)
Temperature Control Control by computer & PID.SSR
Temperature Range Room Temperaturey ~ 200°C
Temperature Accuracy ±0.3°C
Temp. Sensor Grade Class A
Temp. Resolution 0.1°C
Heating Time 30°C to 190°C < 8 min 30°C to 190°C 5 min 30 sec 175°C to 190°C < 1 min
Temperature Recovery Time Less than 1 min to reach ±0.3°C of set temp, after cavity closed
Overshoot Temperature Less than 0.4°C of set temp, after cavity closed
Torque Range Elasticity S`,1~200 lb-in/ Viscosity S",0.3~200 (Auto or manual range)
Torque Unit kgf-cm, lbf-in, N-m, dN-m
Torque Resolution 0.001 unit
Pressure Range 0~1000kg (Auto or manual range)
Force Unit kgf, lbf, N, dN
Force Resolution 0.001 unit
Test Time Range No time limit
Power 1 Phase,AC220V±10%,50/60Hz±3Hz, 10A
Air Pressure 4.6kg/cm2(0.46Mpa) prepared by customer
Dimension(W×D×H) 68×82×130cm (26.8”x32.3”x51.2”) 68×82×128cm (26.8”x32.3”x50.4”)
Weight (Approx.)  

For more information about Foam Pressure Rheometer, please call us at 1.877.884.8378 or Click the button below.