Features:

Technical Specifications HR Rebar Locator:
Detections and Orientations of Rebars	The exact position and orientation of rebars can be measured quickly and accurately. Rebar-free areas can be identified for coring, grinding, resurfacing or insertion of new machinery mountings. HR Rebar Locator can be used to inspect new structures for compliance with specifications as well as old structures under modification.
Measurement of concrete cover	The exact position and orientation of rebars can be measured quickly and accurately. Knowing the size of the rebar, concrete cover can be detected and the distance between the concrete and the surface it will appear in the easy to read display.
Location of Ferrous Metals	Locates any ferrous base material such as pipe, flues, wire and sheets embedded in concrete, masonry or wood. Identification is possible to a depth of 10 inches.
Location of Prestressed Cables	Locates the position of cables and lost tendon splices in pre or post tension concrete products.
R-HR- 8000:	Mini R-Meter unit
R-HR- 8100:	Mini R-Meter w/software
Operating temperature range:	-5°C to 45° (23°F to 113°F)
Bar Size Calibration:	3/8” to 1-3/8” (10 to 36 mm)
Max. Detection Range :	10” (No. 11 Bar) 250 mm (36 mm Bar)
Power Source:	Rechargeable Storage Battery
Battery Life:	4 hours continuous operation

Ordering Information:
R-HR-8000 Mini R-Meter	$2,200.00 US
R-HR-8100 Mini R-Meter W/PC Software	$2,625.00 US

See Also