Universal Hardness Tester-
M4C
For Brinell, Vickers, Rockwell, Knoop and Plastic Testing
M4C - Universal Hardness Tester for Brinell, Vickers, Rockwell, Knoop and Plastic Testing |
M4C Universal Hardness Tester
- Test loads:
- M4C 025/250: 9.8 - 2450 N (1 - 250 kgf)
- M4C 075/750: 29 - 7350 N (3 - 750 kgf)
- Fully automatic test cycle with HB, HV and HK measurements for an uninfluenced image analysis according to standards
- Adjustment of test method, tolerance limits and test cycle input via LCD touch-screen display
Extensive data management & reporting
- Complex data management with efficient import and export functions
- Statistics, histograms and hardness progression graphics can be created
|
Operation & Function
- LCD touch-screen display on the front side for measurement value display HR, HV, HB, HK
- Adjustment of test method, tolerance limits and test cycle input via LCD touch-screen display.
- Additional cycle start key for measurement cycle on the front panel.
- Fully automatic test cycle with HB, HV and HK measurements for an uninfluenced image analysis according to standards
- Manual image analysis of HB, HV and HK impressions
- Zoom function for the exact measurement at manual image analysis
- Conversion of measurement results according to EN ISO 18265 (DIN 50150)
- 2nd test of impressions possible
- Compatible with software platform ecos
- Operator groups with different rights selectable
- Freely switchable language (GE, EN, FR, IT, SP)
Data management & reporting
- Interfaces for data forwarding to PC or network:
- 2x USB 2.0
- 1x serial RS232
- 1x RJ45 100 MBit (Ethernet)
- Complex data management with efficient import and export functions
- Protocol printout without additional PC (direct connection of USB-printer)
- Statistics, histograms and hardness progression graphics can be created
- Connection of external peripheral devices (mouse, keyboard…)
Optical measurement system - High resolution ˝“ camera
- Automatic focussing of test impressions
- Automatic brightness adjustment for automatic image analysis
- Manual brightness adjustment of LED lighting via live image controller
Measurement and control electronics
- Test load application via closed loop by means of force transducer, DC motor, measurement and control electronics as well as software with fully automatic test run
Features - Test anvil adjustment via hand wheel or DC-motor
- 5-fold measurement turret or motoric driven swivelling body for penetrator and lenses
- With fully automatic image analysis or with manual verification of impression-image
on the LCD touch-screen display
Machine base & basic accessories -
Machine base in grey iron in stable and ergonomic design
- Finish: pearl powder RAL 1013 (other paint finishes upon request)
- Test anvil
- Nose cone
- Box for accessories with basic tools
- Works certificate
- Instruction manual (GE, EN, FR, IT, SP)
|
 |
| Available test methods for M4C Universal Hardness tester |
| Brinell |
EN ISO 6506, ASTM E-10 |
| Test loads |
1 / 2.5 / 5 / 6.25 / 10 / 15.62 / 25 / 30 / 31.25 / 62,5 / 100 / 125 / 187.5 / 250 / 500 / 750 |
| Vickers |
EN ISO 6507, ASTM E-92 |
| Test loads |
1 / 2 / 3 / 5 / 10 / 20 / 30 / 50 / 100 |
| Rockwell |
EN ISO 6508, ASTM E-18 |
| Test loads |
15 / 30 / 45 / 60 / 100 / 150 |
| Test methods |
HRA, HRB, HRC, HRD, HRE, HRF, HRG, HRH, HRK, HRL, HRM, HRP, HRR, HRS, HRV, HR15-N, HR30-N, HR45-N, HR15-T, HR30-T, HR45-T, HR 15-W, HR 30-W, HR 45-W, HR 15-X, HR 30-X, HR 45-X, HR 15-Y, HR 30-Y, HR 45-Y |
| Knoop |
ISO 4545 (HK 1), ASTM E-384 |
| Test load |
1 |
| Plastic testing |
(Ball impression hardness) EN ISO 2039-1 (DIN 53456) |
| Test loads [N] |
49 / 132 / 358 / 961 |
Available test methods not according to standards: HVD, HBD |
|
Available Versions of M4C Universal Hardness Tester
|
 |
|
|
M4C 025 G3
Universal Hardness tester - Universal hardness tester 3rd generation
with high resolution 1/2" camera
- LCD-touch screen display
- Fully automatic
image analysis acc. to standards
- Test methods Brinell / Vickers / Rockwell (acc. to standards)
- Test height 0- 250 mm
- Loads 1 - 250 kgf
- Manually adjustable anvil inclu. standard nose cone support dia. 28 mm
- Drilling 18 mm and plane anvil 90 mm
|
M4C 025 G3 M
Universal Hardness tester
- Universal hardness tester 3rd generation
with high resolution 1/2" camera
- LCD-touch screen display
- Manual image
analysis
- Test methods Brinell / Vickers / Rockwell (acc. to standards
- Test height 0 - 260 mm
- Loads 1 - 250 kgf
- Manually adjustable anvil
inclu. standard nose cone support dia. 28 mm
- Drilling 18 mm and plane anvil 90 mm
|
M4C 075 G3
Universal Hardness tester
- Universal hardness tester 3rd generation
with high resolution 1/2" camera
- LCD-touch screen display
- Fully autmatic
image analysis acc. to standards
- Test methods Brinell / Vickers / Rockwell (acc. to standards)
- Test height 0 - 260 mm
- Loads 3 - 750 kgf
- Manually adjustable anvil
inclu. standard nose cone support dia. 28 mm
- Drilling 18 mm and plane anvil 90 mm
|
|
 |
|
M4C 075 G3 M
Universal Hardness Tester - Universal hardness tester 3rd generation
with high resolution 1/2" camera
- LCD-touch screen display
- Manual image
analysis
- Test methods Brinell / Vickers / Rockwell (acc. to standards)
- Test height 0 - 260 mm
- Loads 3 - 750 kgf
- Manually adjustable anvil
inclu. standard nose cone support dia. 28 mm
- Drilling 18 mm and plane anvil 90 mm
|
M4C 250 G3
Universal Hardness Tester
- Universal hardness tester 3rd generation
with high resolution 1/2" camera
- LCD-touch screen display
- Fully automatic
image analysis acc. to standards
- Test methods Brinell / Vickers / Rockwell (acc. to standards)
- Test height 0 - 305 mm
- Loads 1 - 250 kgf
- Adjustable anvil, motor driven
inclu. standard nose cone support dia. 28 mm
- Drilling 18 mm
plane anvil 280x390 mm and plane anvil Ø 90 mm
|
M4C 750 G3
Universal Hardness tester
- Universal hardness tester 3rd generation
with high resolution 1/2" camera
- LCD-touch screen display
- Fully automatic
image analysis acc. to standards
- Ttest methods Brinell / Vickers / Rockwell (acc. to standards)
- Test height 0 - 305 mm
- Loads 3 - 750 kgf
- Adjustable anvil, motor-driven
inclu. standard nose cone support dia. 28 mm
- Drilling 18 mm
plane anvil 280x390 mm and plane anvil Ø 90 mm
|
 |
 |
|
M4C 075 G3 R
Universal Hardness Tester
- Universal hardness tester 3rd generation
- Inclu. 5-pos. measurement turret and nose cone M4Z610
- Nose cone support dia. 30 mm
- Drilling 19 mm
- High resolution 1/2" camera
LCD-touch screen display
- Fully automatic
image analysis acc. to standards
- Tst methods Brinell / Vickers / Rockwell (acc. to standards)
- Test height 0 - 215 mm
- Loads 3 - 750 kgf
- Manually adjustable anvil
inclu. plane anvil 90 mm
|
M4C 750 G3 R
Universal Hardness Tester
- Universal hardness tester 3rd generation
- Inclu. 5-pos. measurement turret and nose cone M4Z610
- Nose cone support dia. 30 mm
- Drilling 19 mm
- High resolution 1/2" camera
LCD-touch screen display
- Fully automatic
image analysis acc. to standards
- Test methods Brinell / Vickers / Rockwell (acc. to standards)
- Test height 0 - 260 mm
- Loads 3 - 750 kgf
- Adjustable anvil, motor-driven
inclu. plane anvil 280x390 mm and plane anvil Ø 90 mm
|
|
See Also: QV-700 Universal Hardness Tester
Bench-top Hardness Tester Main Page
Metal Testing Main Page
To place an order for M4C Universal Hardness Tester or more information, please E-mail our sales
department at: sales@qualitest-inc.com
or call us toll-free at:
1-877-884-TEST.
|
