» Back to Vickers Hardness Testers Main Page

Micro Hardness / Microhardness Testers - QV-1000 Series

QV-1000AAT Micro Hardness Tester - Analog with Auto Turret (motorized)

QV-1000 Series Micro Hardness (Microhardness) Tester

Our advanced line of QV-1000 Series hardness tester are low-cost and precise testing systems suitable for hardness analysis of metallic specimens in metallography laboratories or production environments.

Features

Motorized turret
High quality microscope with digital reading (QV-1000DAT Model)
Fully automatic load control
Easy operating system
Two optical paths
Built-in high speed thermal printer
XY stage with minimum reading of 0.01mm
CMT Image Analysis Software QV-MONITOR or QV-CCD system (optional)
Dual indenter (Microhardness / Knoop) turret (optional) 2 Kg load optional

QV-1000AAT Micro Hardness (Microhardness) Tester - Analog with Auto Turret (motorized)

Standard configuration includes

Technical Specifications for QV-1000AAT Micro Hardness (Microhardness) Tester
Scales	HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1 (HV2)
Display	Dwell time (sec), hardness value (by entering diagonal lengths by digital calculator) menu operated user interface, drill down structure through key path operation, shows hardness readings through calculator input, general settings, diagonals, dwell time, RS232 connections, printer settings, illumination settings.
Test load	10 - 25 - 50 - 100 - 200 - 300 - 500 - 1000gf (2000gf optional)
Accuracy	Conform to EN-ISO 6507 / ASTM E384
Load control	Automatic (loading/dwell/unloading)
Load duration	5 to 60 sec (5 sec increments)
Test force	By dial knob - applied load shows on display
Microscope Objectives	10x, 40x
Eyepiece magnification	15x / mechanical thumbwheel
Total magnification	150x (observation), 600x (measurement)
Measuring range	200µm
Resolution	0.03µm
XY stage dimensions	100 x 100mm
Travel range	25 x 25mm
Resolution	0.01mm (micrometer)
Specimen Maximum height	85mm (2.55")
Maximum depth	90mm (3.35") (from centre)
Optical path	2-way switchable
Power supply	110-220V, 50Hz
Dimensions	470x210x420mm
Weight	36kg

QV-1000DAT Micro Hardness Tester - Digital with Auto Turret (motorized)

QV-1000AAT Micro Hardness Tester - Analog with Auto Turret (motorized)

QV-1000DAT Micro Hardness (Microhardness) Tester - Digital with Auto Turret (motorized)

Standard configuration includes

Technical Specifications for QV-1000DAT Micro Hardness (Microhardness) Tester
Scales	HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1 (HV2)
Display	Dwell time (sec), hardness value (by entering diagonal lengths by digital calculator) menu operated user interface, drill down structure through key path operation, shows hardness readings through calculator input, general settings, diagonals, dwell time, RS232 connections, printer settings, illumination settings.
Test load	10 - 25 - 50 - 100 - 200 - 300 - 500 - 1000gf (2000gf optional)
Accuracy	Conform to EN-ISO 6507 / ASTM E384
Load control	Automatic (loading/dwell/unloading)
Load duration	5 to 60 sec (5 sec increments)
Test force	By dial knob - applied load shows on display
Microscope Objectives	10x, 40x
Eyepiece magnification	15x / mechanical thumbwheel
Total magnification	150x (observation), 600x (measurement)
Measuring range	200µm
Resolution	0.03µm
XY stage dimensions	100 x 100mm
Travel range	25 x 25mm
Resolution	0.01mm (micrometer)
Specimen Maximum height	85mm (2.55")
Maximum depth	90mm (3.35") (from centre)
Optical path	2-way switchable
Power supply	110-220V, 50Hz
Dimensions	470x210x420mm
Weight	36kg

QV-1000DM Micro Hardness Tester - Motorized turret and digital measuring microscope with external CCD monitor system

QV-1000DM Micro Hardness (Microhardness) Tester - Motorized turret and digital measuring microscope with external CCD monitor system

Standard configuration includes

Main unit with CCD Camera and monitor
Motorized turret
Diamond indentor
Objectives 10x, 40x
Eyepiece 15x
XY-stage with micrometers
Adjustable feet (3 pcs)
Clamping devices (3 pcs)
Extension tube for CCD-camera
Digital eyepiece incl. protection cover Spirit level
Micro-test plates (2 pcs)
Spare light bulb 12V-30W
Spare fuses (2 pcs)
Installation and user manual
Instruments certificate

Features

“Easy measure” monitor system
Motorized turret
High quality digital microscope
Fully automatic load control
Easy to use operating system
Two optical paths
Built-in high speed thermal printer
XY stage with minimum reading of 0.01mm
Dual indentor (/Knoop) turret optional
2kg load optional

Typical applications

Steels, nonferrous metals, IC wafers, small precision components
Thin plastic, metallic foils, plating, coating, surface layers, laminated metals
Effect of heat treatment, case depth analysis, depth of carburised and flame hardened layers

Technical Specifications for QV-1000DM Micro Hardness (Microhardness) Tester
Scales	HV0.01, HV0.025, HV0.05, HV0.1, HV0.2, HV0.3, HV0.5, HV1 (HV2)
Display	Dwell time (sec), hardness value, menu operated user interface, shows: hardness readings, general settings, diagonals, RS-232 connections, illumination settings. CCD camera on eyepiece projects indentation on standard accessory CRT screen, allowing easy to read and more accurate measurement
Test load	10 - 25 - 50 - 100 - 200 - 300 - 500 - 1000gf (2000gf optional)
Accuracy	Conform to EN-ISO 6507 / ASTM E384
Load control	Automatic (loading/dwell/unloading)
Load duration	5 to 60 sec (5 sec increments)
Test force	By dial knob - applied load shows on display
Microscope Objectives	10x, 40x
Eyepiece magnification	15x / mechanical thumbwheel, digital encoder built-in
Total magnification	150x (observation), 600x (measurement)
Measuring range	200µm
Resolution	0.03µm
XY stage dimensions	100 x 100mm
Travel range	25 x 25mm
Resolution	0.01mm (micrometer)
Specimen Maximum height	85mm (2.55")
Maximum depth	90mm (3.35") (from centre)
Optical path	2-way switchable
Power supply	110-220V, 50Hz
Dimensions	470x210x420mm
Weight	36kg