Universal Testing Machines
Qualitest offers the most competitive line of Universal Testing Machine range in the industry. Our comprehensive range of Universal Testing Machine products, along with our extensive range of grips/fixtures, load cells, extensometers, offer the best price/quality ratio models on the market. High quality, accurate and reliable models with reasonable prices. The Q-Series Universal Testing Machines range is designed for quick and reliable tensile, compression, flexure (bending), shear, peel, fatigue cycling, and constant load tests on metals, composites, alloys, plastics, elastomers, textiles, and finished products.
Our durometers are world-recognized for the highest accuracy, quality, durability and cost efficiency. This complete range of durometers covering from the economical analog dial types up to fully automatic and motorized versions can measure the hardness of all natural and synthetic rubber products, acrylic glass, acetates, casting resin, polyester, thermoplastics, PVC, neoprenes, hardboards, wood, leather, fruits and much more.
Pendulum Impact Testers
A full range of Pendulum Charpy and Izod Impact Testers available in analog display, digital or high performance systems with optional software and accessories such as Notchers for Impact Specimens, that precisely determine absorbed impact energy and resistance to breakage of plastic specimens. Innovative mechanical design features make this range of impact instrument the most cost-effective and accurate impact testers available on the market. These models meet and exceed all ASTM and ISO requirements and have the flexibility to satisfy future test standards.
Gardner Impact Tester
Gardner impact testers, available in a few variations have gained wide acceptance as a means of testing the impact resistance of many types of coatings from paints and vanishes to tough plated, plastic or laminated coatings. Gardner Impact Tester is also used to establish quality standards for resistance to impact surface damage and penetration of many construction materials such as plastics, resins, fibreglass, sheet metals, plywood, etc.
Melt Flow Indexer
Our range of MFI Melt Flow Indexers are highly precise melt testing instruments for the measurement of melt flow rate (MFR) or melt volume rate (MVR) in quality control and research applications. The extensive range offered by Qualitest include basic economical types that meet Method A while having other variations available with various levels of functionality, sophistication and price.
Specific Gravity Testers (Densimeters)
Available in 3 models with various density resolutions, this popular and best selling range of specific gravity testers can be used to accurately measure density of plastics, rubber, metals and much more. These models also come optionally with liquid gravity kits so that the specific gravity of both solid and liquid materials can be determined.
Apparent (Bulk) Density Tester
Our range of Apparent Bulk Density Testers are used to measure apparent density, bulk factor, and where applicable, the pourability of plastic materials such as molding powders. There are three methods according to ASTM D 1895 that are applicable to various forms of these materials that are commonly encountered - from powders and granules to large flakes and cut fibers.
Color Testing Equipment
Qualitest offers a wide range of quality testing equipment for the Color Testing industries at the best price to quality ratio on the market. Qualitest offers Gloss Meter, Haze-Gard, Portable Spectrophotometer, Orange Peel / DOI, Lightbooth, and more to come.
Packaging Film Testing Equipment
Qualitest offers a wide range of quality testing equipment for the film packaging industries at the best price to quality ratio on the market. Qualitest offers Drop Dart Testers, Coefficient of Friction COF Testers, Friction/Peel Testers, Elmendorf Tear Testers, Hot Tack Heat Seal Testers, Off-line Film Thickness Gauges, On-line Film Thickness Gauges, Leakage Testers, Leak/Seal Strength Detectors, Film Free Shrink Testers, Film Thermal Shrinkage Testers, Film Permeability Testers, and more.
- Drop Dart Impact Tester for Plastics Film
- Coefficient of Friction COF Tester
- Elmendorf Tear Tester
- Environmental Stress Cracking Tester
- Film Free Shrink Tester
- Film Permeability Testers
- Film Thermal Shrinkage Tester
- Fogging Tester
- Friction/Peel Tester
- Hot Tack Heat Seal Tester
- Lasting Adhesive Tester
- Leak / Seal Strength Detector
- Leakage Tester
- Minimum Film Formation Temperature Tester MFFT
- Off-Line Film Thickness Gauges
- On-Line Film Thickness Measurement Systems
- Opacity Meter
- Primary Adhesive Tester
- Strip Sample Cutter
Plastics Pipe / PVC Testing Equipment
Qualitest offers a wide range of quality testing equipment for the Plastics Pipe / PVC Testing industries at the best price to quality ratio on the market. Qualitest offers Drop Weight Impact Testers, Hydrostatic Pressure Tester, and more to come.
Sample Specimen Preparation Equipment
A test specimen is the most important component of tensile testing for it determines the actual physical properties of the material being tested. The specimen must conform to exact physical dimensions required by various standards. The SpeciCut I, II, III, IV, & V, and SpeciLathe I & II sample specimen preparation machines as well as molding press, and clicker press range we offer guarantee the most diverse, reliable and economical methods for preparation of your desired test specimens.
LME Laboratory Mixing Extruder
The LME Laboratory Mixing Extruder is a unique laboratory tool developed to evaluate the processability of a variety of plastics and rubbers prior to production. From very fine powders to coarse materials, the LME will meet many extruding needs. The LME possesses a moveable header and dial gauge that allows for constant mixer adjustability.
LOI Limiting Oxygen Index Chamber
The advanced LOI Limiting Oxygen Index Chamber accurately determines the relative flammability of plastics and other materials, by measuring the minimum oxygen concentration that will support combustion according to ASTM D2863 and ISO 4589 specifications. The test specimens are burned in a precisely controlled atmosphere of nitrogen and oxygen. The operator adjusts the supply gases and uses the flow meter readings to calculate the oxygen index.
HDT Vicat Heat Deflection Testers
HDT/VICAT Systems offer Heat Distortion Temperature (HDT) and Vicat Softening Point of plastic materials. Qualitest offers a single station economical Heat Deflection tester, while the HDV3 and HV2000 Systems offer sophisticated control using Windows based software.
Brittleness Point Temperature Tester
This test method covers the determination of the temperature at which rubber, plastics and elastomers exhibit brittle failure under specified impact conditions. With brittleness tester, Samples may be housed in a thermostatic bath, based on the reference standards ASTM D746, ISO 812, and GB/T 15256.
Our freezing testers available in vertical or horizontal configurations are used to test the bending/flexing durability of rubber, plastics, synthetic leather, shoes, etc., under cold temperatures as low as -30°C or -50°C depending on the selected model. The test chambers can be equipped with a variety of flexing/bending fixtures made of stainless steel. These models conform to ASTM D1790, and ASTM D1593 standards.
Environmental Test Chambers - QT 7005 Series
Qualitest environmental test chambers are capable of simulating a wide range of temperature or temperature and humidity conditions. These chambers are well-suited for use in electronic, military, and pharmaceutical quality assurance and reliability testing, as well as research testing and production processes. Qualitest Environmental chambers are available in bench top and floor standing models in a variety of temperature ranges and chamber sizes.
Carbon Black Content Analyzer
The tube oven ES14 / Carbon Black content analyzer can be used for determination of ash and/or carbon black content of rubber, or carbon black in olefin plastics. Temperature controller, over temperature thermostat, drying tube, flow meters, wash bottles and 5 quartz glass boats are included with this popular tester.
Rotary Abrasion Tester
Rotary Abrasion Tester is a cost-effective and high quality instrument used to determine the abrasion for rubber, leather, plastics, fabrics, paper, paint, plywood, tiles, glass, etc. and is built in conformance to ASTM D4157, DIN-53754/53799/53109/52347, and TAPPI T476. For this method of abrasion, a four-inch diameter sample is mounted on a rotating turntable. Abrasive wheels are applied to the sample using a fixed weight. For a specified number of cycles, the abrasive wheels wear away the sample.
Qualitest offers a full range of capillary rheometers that offers state-of-the art features and will meet the demands of a 24-hour a day shop floor operation while maintaining the highest possible level of accuracy, repeatability and sensitivity for R&D applications. Qualitest line of capillary rheometers is versatile and easy to use yet they offer the most sophisticated materials characterization, data analysis, and reporting capabilities. Our Capillary Rheometers are available with 10 or 25kN load cells, single or double barrel configuration and optional features to meet all the needs of QA and R&D in the industry.
These gel timers are perfect for determining the gel time of resinous plastics, adhesives, crying oils, two component elastomers, and paints. A low torque, synchronous motor rotates a specially shaped stirrer in the catalyzed resin or elastomer. As gelation occurs, drag exeeds torque and the motor stalls. This signals an electronic circuit which stops the clock and activates a flashing lamp. The gel time will show on the LCD display.
Full Notch Creep Tester - For Testing of Plastic and Rubber Materials
Qualitest offers a wide range of Creep Testers - for testing of Metals. A creep-testing machine (Creep Tester) measures "creep" or in other words the change of the material's form in relation to time after being subjected to high levels of stress. Creep machines are primarily used by engineers to determine the stability of a material and its behavior when it is put through ordinary stresses.
XRF Spectrometers for RoHS Detection
XRF (X-ray fluorescence spectrometry) is a non-destructive analytical technique used to identify and determine the concentrations of elements present in solid, powdered and liquid samples. Specially designed for RoHS substance detection (Cd, Pb, Cr, Hg, and Br) Our range of EDX Spectrometers for RoHS detection in plastics materials is available in two popular tabletop and portable configurations.
Salt Spray Tester – Salt Spray Cabinet – Chamber – Fog Apparatus
The Salt Spray Tester – Salt Spray Cabinet – Chamber – Fog Apparatus is used to create and maintain the salt spray (fog) test environment, and test the anti-corrosion quality of all the materials surfaces after the rust-proof of painting, coating, electroplating, anodizing and rust-proof of greasing.