PosiPen®, Measures non-magnetic coatings on steel
Measures non-magnetic coatings such as paint, enamel, plating, hot-dip galvanizing on steel
PosiPen can be placed with pin-point accuracy on any location of the part to be measured which other Gages are not able to reach. PosiPen measures:
- on hot surfaces
- on small surfaces
- in different positions
PosiPen has a very small unique magnet and therefore can measure on extremely small parts, on peaks and valleys.
Each PosiPen has two scales, mils (inch) and microns (metric)
Ideal for measuring on small, hot or hard-to-reach surfaces.
Range:
0.25 to 20 mils (inch) Tolerance: +/-10% and 0.1 mil
5 to 500 microns (metric) Tolerance: +/- 10% and 2.5 microns
Each PosiPen is calibrated to NIST calibration standards.
PosiPen is manufactured in three versions:
- PosiPen Model A for measurements on surfaces with normal temperatures
- PosiPen Model B for measurements on surfaces with extreme temperatures (between -150° F and +450° F - between -100° C and +230° C)
- PosiPen Model C
Some objects become excessively magnetic. For example 300 series stainless steel is non-magnetic but becomes magnetic over time. Certain welding seams become magnetic compared to the surrounding metal. PosiPen C allows you to compare ferrite content to a known value. PosiPen C has two scales
- Ferrite content measuring range: 0-10 linear units to compare Ferrite content to an known value
- Coating thickness measuring range: 0.25 to 20 mils (inch scale) Tolerance: +10% and +0.1 mil
Triple Indicator:
- Use the red/silver joining line when the Gage is horizontal (walls)
- Use the green line when the Gage is pointing straight down (green/ground)
- Use the blue line when the Gage is pointing straight up (blue/sky)
Easy to Use:
Place the tip of the PosiPen on the coated surface and allow the magnet to contact. Pull the PosiPen straight from the object to be measured while keeping close watch on the appropriate indicator. Note the reading when the magnet releases.
Easy to Carry:
Just like a ball point pen, it is always there when you need it!
| Internet Prices | ||
|---|---|---|
PosiPen A |
$ 219.00 US |
 |
PosiPen B |
$ 269.00 US |
|
PosiPen C |
$ 219.00 US |
|
For further information or to place an order for the PosiPen®, Measures non-magnetic coatings on steel, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button