The
PR-8² sonic tester has been modified for the automotive
industry. This gauge is commonly used for measuring the
thickness of cylinder walls, head ports, decks, tubing,
body panals, and windshields. It also has the ability to
scan the length of a part to find the the minimum thickness.
The
PR-8² is backlit and the unit operates for up to 200 hours
on a single set of batteries.
The
PR-8² is protected by 5 year limited warranty.
Applications:
Cylinder's & Pitting , Head Ports & Pipe,
Roll Cages, Body Panels, Chasis, and a variety of other
applications
|
Physical
Weight: 10 ounces
Size:
2.5 W x 4.5 H x 1.24 D inches
63.5 W x 114.3 H x 31.5 D mm
Operating
Temperature: -20 to 120F (-30 to 50C)
Case:
Extruded aluminum body / nickel plated aluminum end caps.
resistant
to impact and is environmentally sealed.
Keypad
Sealed membrane that is resistant to both water and petroleum
products.
Six tactile-feedback keys.
Transducer
Dual element (transmit and receive).
1 to 10 MHz frequency range.
Locking
quick disconnect Lemo connectors.
4 foot cable.
Custom transducers available for special applications.
|
Power
Source
Two 1.5V alkaline or 1.2V NiCad AA cells.
Typically
operates for 200 hours on alkaline and 130 hours on NiCad.
Display
Multi-function
4.5 digit liquid crystal display with 0.500 inch numerals,
backlit for use in poor light conditions.
Measurements
displayed in inches, iches/microsecond, millimeters, and
meters/second.
Bar
graph indicates stability or reading.
Certification
Factory
calibration traceable to national standards.
Warranty
5 year
limited.
|
Measuring
Range:
Measures
from 0.040 to 1.50 inches (0.63 to 199.99 millimeters) in
casted materials.
Switch
to select English or metric units.
Resolution:
0.001 inch (0.01 millimeter)
Velocity
Range:
.0492 to .3937 in/m s (1250 to 10,000 meters/sec)
Built-in:
Stainless
steel reference disk for probe zeroing.
Four
readings per second for single point measurements or 16
per second in SCAN mode.
Single
and Two point calibration option included.
|
