Modular Testing System for Building MaterialsToniNORM
Modular, expandable testing system for automatic, computer controlled test procedures
ToniNORM 3000kN Concrete Compression Test Machine with ToniTROL Digital Control System |
ToniNORM 10,000kN Concrete Compression Test Machine with Integrated ToniTROL Control System |
ToniNORM is one of the world’s most advanced compression test systems. The compact ToniNORM is perfect for a laboratory environment. With ToniNORM measuring and control system, the entire testing procedure from machine setup to data recording, is controlled with full digital accuracy. The software programming for the system allows hands-off testing to ensure technician safety and testing accuracy. ToniNORM, along with the rest of the ToniLAB test systems, can be operated and monitored remotely through a computer network connection.
ToniNORM is available in testing loads from 200kN (45,000lbs) to 10000kN (2,270,000lbs). The most common strength testers are 2000kN, 3000kN, 4000kN, 5000kN and 6000kN.
ToniNORM features:
- A top quality fixed rigid frame
- A hardened piston and cylinder
- An upper tilting spherical ball seat
- A digital control column measuring system.
Rigid Frame: The four-column rigid frame is fully clamped to ensure there is minimal play and deflection even at the highest machine test loads. The servo valves for oil pressure are integrated into the base of the machine.
Piston and Cylinder: Mounted at the base, the plunger piston is hardened to ensure minimal deflection. The piston is equipped with a protection cap and stroke indicator.
Spherical Ball Seat: The bearing blocks are similarly hardened (=HRC 55) to ensure maximum test specimen compression. The upper bearing block can tilt up to 3º to any side to allow for top surface angle.
The lower bearing block is equipped with a crosshair and 6.10” (155mm) diameter centering ring. The maximum daylight between the platens without the auxiliary plates is 13.4” (340mm) which can be reduced to 10.8” (275mm) with one auxiliary plate and 8.3” (210mm) with both plates. |
ToniTROL Digital Control System:
As a modular control system, the ToniTROL can be adapted to your specific testing needs to include up to 100 programmable automatic test procedures, specialized building material testing software and environmentally protected data transfer and interface system.
ToniTROL is capable of controlling and monitoring up to three load frames, 13 peripheral sensor interfaces and extended test and specimen data storage. The software can be upgraded at need should your ToniLAB expand to include other automated concrete or cement test systems.
|
 |
|
| Special
Features:
-
Top
quality, rigid load frames
-
Intelligent
control system
-
Servo-hydraulic
control
-
Class
1 DIN 51220
-
Various software options
-
Capibility of future test expansion
-
Modular
system
|
ToniNORM Model 2091.2000 / 2091.3000 |
Maximum test load |
2000 kN / 3000 kN |
450,000 lbs / 680,000 lbs |
Distance between columns |
|
|
Right to left
|
355 mm |
14.0” |
Front to back
|
255 mm |
10.0” |
Bearing blocks – standard |
300 mm Ø |
11.8” Ø |
With option 2091.xxxx.30
|
300 x 300 mm 2 |
11.8” x 11.8” |
With option 2091.xxxx.32
|
320 x 520 mm 2 |
12.6” x 20.5” |
Hardness of Bearing Blocks |
≥ HRC 55 |
Distance between bearing blocks without auxiliary plate |
340 mm |
13.4” |
With one auxiliary plate (2031.xxxx.43)
|
275 mm |
10.8” |
With two auxiliary plates (2031.xxxx.44)
|
210 mm |
8.3” |
Piston stroke |
65 mm |
2.6” |
Expansion (under maximum load) |
1.0 bar |
14.5 psi |
Working pressure |
454 bar |
6,583 psi |
Pump delivery |
1.4 L/min |
0.37 gal/min |
Oil container capacity |
6 L |
1.6 gal |
Working height without auxiliary plates (upper edge to lower bearing block) |
1060 mm |
41.7” |
With two auxiliary plates |
1190 mm |
46.9” |
Total height with 65mm piston stroke |
1740 mm |
68.5” |
Area required (complete) WxD, net |
960 x 500 mm 2 |
37.8” x 19.7” |
Weight, approximate net |
1700 kg |
3740 lbs |
|
 |
| Also available is our ToniPRAX for combined bending and compression testing equipment for universal applications.
Our more economical M-Line Compression Testing Machines are also available.
|
Cement Testing Main Page
Concrete Testing Main Page
For
more information, or to request a quotation please E-mail our sales
department at: sales@qualitest-inc.com
or call us toll free at: 1-877-884-TEST.
|
