Ultrasonic Portable Hardness Tester UCI 1000

THE UCI 1000 is incorporated with ultrasonic UCI technology which enables the hardness testing on very thin and small work pieces. UCI 1000 is a high-precision portable device for quick measuring of metals hardness, including surface-hardened layers (cementation, nitride hardening, high frequency current hardening, etc.), plated coating (chrome), and mechanical strength estimation. The hardness tester is used for measuring within the hardness ranges of main hardness scales – HB, HRC, HV, as well as HRA, HRB, HSD scales and tensile strength – δв (conversion as per GOST 22791-77 for pearlitic steels).

The device has an interactive intuitive interface as per the principle “plug and measure”. , programming functions and additional scales for nonstandard control tasks are provided. The hardness tester is optimal for field, workshop or laboratory conditions.

The Main Features of UCI 1000

• Measuring in slots and blind holes from 5mm.
• Stable measurement independent of force and time.
• Low influence of the device deviation from normal line to the controlled surface.
• Ultra-small minimum control area.
• Low sensitivity to the product curvature and wave height on rough surface.
• No influence of the sensor spatial position on measurement result.
• Equipping with additional changeable sensors of different design and load and positioning heads.
• Quick correction of device readings with one or two reference test blocks.
• Quick creation of individual calibrations using maximum two samples (“training” mode).
• Additional scales defined by user.
• Flexible memory for results recording.
• LCD display for graphics.
• Interface – allows to work as per the principle “PLUG AND MEASURE”.
• Measurement results are not influenced by thickness or product mass
• No visible print on “mirror” surfaces
• Possibility to control thin walled products and products of intricate profile

The standard scope of supply includes: Electronic Unit; S type Sensor(other type of sensors are available as optional); Accumulator; Charger; Operation manual; Calibration certificate; PC connection cable; Protection case and bag for carrying and storing.

Technical Parameters

Model	UCI 1000
Probe Type	S type sensor (50N)
Tolerance	± 3%
Spot Diameter on the product	1mm on a plane and 5mm in a blind hole (slot)
(for sensor positioning)
measurement to calculate average value	1-9
Memory capacity for results	6000
No of additional individual calibration	35
No of additional programmable scales	3
Automatic switch off	Yes
Applicable Test Materials	steel & cast steel, case hardened articles, Thin walled pipe lines, turbine rotors, forming rolls, crankshafts, gears, metal working tools, vehicle parts, rails, railroad car wheels, semi finished industrial products ( casting, sheets), welded joints etc.
Dimensions	150 x 80 x 30 mm
Operating temperature range	-10 … + 40°C
Weight (Gauge only)	0.4kg

For further information or to place an order for the Ultrasonic Portable Hardness Tester UCI 1000, please CLICK HERE, call us Toll-Free at: 1.877.884.TEST, or click on the "HOW TO ORDER" Button