2000B-Series Low Cost Ultrasonic Thickness Gauges

MX-1 Basic Thickness Gauge - Click here for expanded info

The MX-1 ultrasonic thickness gauge is our most basic MX-Series model. This gauge can be pre-programmed for a specific material type using a simple PC program. The MX-1 is an excellent choice for users that measure the same material type all the time, and do not have the need to re-calibrate to different materials on the fly. 5 Year Limited Warranty is included with MX-1. More info...

The MX-2 ultrasonic thickness gauge has 8 common preset material types and 2 user programmable types. This makes the MX-2 a little more flexible for those users that have a need to meausre more than one material type. 5 Year Limited Warranty is included with MX-2. More info...

The MX-3 ultrasonic thickness gauge is the first model in the MX line with the ability to field calibrate on the fly. This model offers extreme flexibilty and accuracy to calibrate to a variety of materials instantly. The MX-3 is also equipped with a two point calibration option and comes with the high speed scan mode. 5 Year Limited Warranty is included with MX-3. More info...

MX-5 Thickness Gauge - Click here for expanded info

The MX-5 has all the features of the MX-3 plus: An audible and visual alarm mode, and also features a differential mode and an RS232 port. 5 Year Limited Warranty is included with MX-5. More info... 

The MX-5DL has all the features of the MX-5 plus: An Internal data logger that stores a total of 1000 readings in 10 files of 100 readings each file. 5 Year Limited Warranty is included with MX-5DL. More info...

UMX Underwater Enclosure Kit - Click here for expanded info

Take your MX-3 underwater with you for inspections! The UMX is an underwater enclosure specifically designed for offshore inspection purposes. Rated to 300 feet underwater. The nice part about this accessory enclosure is the ability to remove the MX-3 and use it, very conveniently, for other "Above Water" applications. More info...

The MMX-6 is a Multi-Mode thickness gauge that has the ability to measure through painted or coated surfaces and eliminate the thickness of the paint using a dual element style transducer in echo-echo mode. The MMX-6 can also effectively find pits and flaws with the press of a single button. The MMX-6 has all the features of the MX-3 plus: An audible and visual alarm mode, and also equiped with an RS232 port. 5 Year Limited Warranty is included with MMX-6. More info...

The MMX-6DL has all the features of the MMX-6 plus: An Internal data logger that stores a total of 1000 readings in 10 files of 100 readings each file. 5 Year Limited Warranty is included with MMX-6DL. More info...

MMX-7 Multi-Mode Thickness Gauge -Click here for expanded info

The MMX-7 has all features of the MX & MMX gauges with some additional features and advantages. Selectable Large Digits and B-Scan display options. An Internal data logger that stores a total of 12,000 readings and waveforems, 64 user custom definable setups, selectable transducer table for improved linearity, thru paint mode with the single press of a button, multiple calibration and material selection options, and selectable low, med, or high gain options. This is all nicely packaged in a very mini portable aluminum extrusion for extra durability, not to metion, portability! The MVX/PVXview or java based PC software makes this thing a complete unit. More info...

MVX Advanced A/B Scan Thickness Gauge -Click here for expanded info

MVX is a full function A-Scan and B-Scan thickness gauge with a widest variety of modes and features for extra versatility. The physical size, weight, and display resolution are just a few of the benefits of the MVX. The adjustable square wave pulser provides the flexibility necessary for both high resolution and penetration requirements. The MVX is equipped with multiple viewing options to provide users with a complete set of inspection tools: (RF waveform, +/- Rectified waveform, Time based B-Scan, and Large Digits). The A-Scan rectified mode is commonly used for detecting flaws/pits in pulse-echo mode and measuring thru-paint and coatings in echo-echo mode, while the time-based B-Scan feature of the MVX displays a cross section of the test material. It is commonly used to display the profile of the bottom surface of the test material. Built-in hardware AGC gain control for thrupaint measurements in multi-mode operation. More info...

CMX Series Material & Coating Thickness Gauges -Click here for expanded info

CMX is a full function ultrasonic thickness and coating gauge with a widest variety of modes like Pulse-Echo, Pulse-Echo w/Coating, Pulse-Echo w/Temperature Compensation, Echo-Echo, & Coating Only and features for extra versatility like Automatic probe zero, probe recognition, and temperature compensation. More info...

The VX is our velocity gauge. This gauge has the ability to determine the velocity of materials by calibrating to a known material thickness. The VX is typically used to verify material consistency, or determine a test material type. More info...

The PX-7 is our basic precision gauge model. The PX series are packaged in an aluminum extruded body, with nickel plated aluminum end caps. The PX series gauges are typically used for thin material applications. This gauge has the ability to calibrate to a variety of different materials using a one point calibration option. Some of the features include: Scan feature (allowing the user to scan an area for the minimum thickness), alarm mode (audible & visual), differential mode (+/- from nominal thickness value), and RS232 port out.. 5 Year Limited Warranty is included with PX-7. More info...

The PX-7DL has all the features of the PX-7 plus a data logger that stores a total of 1000 readings in 10 files of 100 readings each file. Complete with file transfer software.5 Year Limited Warranty is included with PX-7DL. More info...

PVX Precision A Scan Thickness Gauge - Click here for expanded info

The PVX finishes the line of PX gauges with class. This advanced instrument is loaded with all of the features of the PX gauges and a lot more. Four selectable display options (RF, Rectified, B-Scan, and Large Digits). An Internal data logger that stores a total of 12,000 readings and waveforems, 64 user custom definable setups, selectable transducer table for improved linearity, multiple modes with the single press of a button, multiple calibration and material selection options, and auto waveform find - just to mention a few! This is all nicely packaged in a very mini portable aluminum extrusion for extra durability, not to metion, portability! The PVXview java based PC software makes this thing a complete kit! More info...

New Model, the PR-8 2, has been tuned specifically for racing applications. Engine rebuilders use this gauge for cylinder and head porting. Chasis builders use the gauge for tube inspections. More info...

PR-8V Multi Visual Sonic Tester - Click here for expanded info

This is our latest addition to the racing gauge product line. The PR-8V offers a great deal of additional high end features for racing applications. Two selectable display options (B-Scan and Large Digits). The internal data logger is stetup for mapping engine blocks and making general chassis inspections. stores a total of 12,000 readings and B-Scans, 64 user custom definable setups, selectable transducer table for improved linearity, thru paint mode with the single press of a button, multiple calibration and material selection options. The PR-8V sonicview engine mapping software is included with the PR-8V, and provides the racers with all the reporting requirements needed. More info...

MINI-MAX Ultrasonic Bolt Meter- Click here for expanded info

The Mini-MAX, The economical MINI-MAX, Ultrasonic Bolt Tension Monitor, defines the state of the art in the measurement of the actual elongation produced by tightening a threaded fastener. The MINI-MAX Bolting Meter can measure the elongation very accurately in fasteners of virtually any material from 1/2 inch to 4 feet in length. The measurement is achieved by determining the change in the transit time, of an ultrasonic shock wave along the length of the fastener as the fastener is tightened by any method. The on-board microcomputer automatically interprets this time measurement to display the time (nanoseconds), elongation, load, stress, or %strain from stretching a fastener. More info...