Mooney
Viscometer
MVR2000
The
MVR2000 Mooney Viscometer measures the change in a rubber and plastic
elastomer properties over time, from uncured to scorched state.
The specimen is physically deformed by a rotating platen which will
determine changing viscosity at preset temperatures. When the test
is completed, the dies will automatically reset and allow for removal
of the specimen. With the PID temperature controller you can assure
that smooth and accurate data will be taken throughout the test.
The servo-driven motors contribute to very accurate results; they
are also quiet and require no maintenance. This advanced and yet
economical Mooney Viscometer tester is designed for easy maintenance;
it is equipped with modular electrical boards, quick detachable
upper and lower dies, calibration via computer and auto hardware
detect features. The unit is safe as it is equipped with a transparent
arc shield. With our Mooney viscometer you can ensure reliable results
at an affordable price.
SOFTWARE
Software is an integral part of any testing apparatus this is why
we have developed a program to work dependably with our Mooney Viscometer
and intuitive with the operator. The software allows you to configure
a variety of tests. Auto detection makes this program simple to
setup and initiate testing. Safeguarding data is an important factor
so we have an automatic back-up system to ensure data will not get
lost. For the operators comfort, the program is customizable in
terms of fonts, color settings, beep alerts and selectable measuring
units. There is an Import / Export function which allows the user
to exchange data from one format to another. (Example: export data
to Excel) Customizable reports allow the user to determine up to
300 different parameters including multiple charts and tables so
your reports can look just the way you want them.
Like
our several other elastomeric testing instruments, Mooney Viscometer
is commonly used by companies manufacturing or testing chemical
compounds, technical service centers, original equipment manufacturers
and others concerned with product consistency, safety and durability.
| Specifications |
| Standards |
ASTM-D1646,
ISO-289, JSC-k6300 |
| Temp.
control |
Control
by computer & PID.SSR Range:room temp. to 200°C |
| Temp.
accuracy |
Temp.error±0.3°C,
Min. reading of temp. 0.1°C |
| Time
for retrieve temp. for close dies |
100°C<60
minutes |
| Rotor
Speed |
2.00 ±
0.02 RPM |
| Mooney
viscosity range |
1 to 200
Mooney (selectable by auto-switching or manually setting) |
| Torque
Measuring units |
kg-cm /
lb-in / N-m / MOONEY |
| Torque
unit |
0.1 unit
of Mooney, 0.01 unit of lb-in, 0.01unit of N-m, 0.01 unit of
kg-cm |
| Time
range |
Without
limit; can be altered during test |
| Rotor |
L(large)
and S(small) type available |
| Printed
Data Points |
Mooney,
Lowest viscosity, scorch time, cure index, stress relaxation
time and stress relaxation value |
| Graphic
Output Curves generated: |
•
MOONEY viscosity curve
• Scorch curve
• Stress relaxation curve.
• Temperature curve of the upper and lower die |
| Power |
1Ph,AC220V±10%,
50/60Hz±3Hz, 10A |
| Air
Pressure |
60 psi
(4.6kg/ cm2 or 0.46MPA)minimum required |
| Specimen
volume |
Ø50mm,
6mm(D) × 2 |
| PC
Requirements |
Pentium
II or higher |
| Dimensions |
•
Main unit: 26” x 26” x 49” (66×66x124cm)
• Test stand: 24” x 24” x 30” (60×60×75
cm)
• Computer cabinet: 22” x 24” x 60”
(55×60×151cm including the printer) |
| Weight |
880 lbs
(400kg) |
| Accessories
Included |
2 torque
calibrators, 2 heater plates, pair of gloves, power regulator,
screwdriver, 500 sheets of printer paper, 10 sealed rings, Large
type rotor and Small type rotor. |
Also check: Oscillating Disk Rheometer Page
Also check: Moving Die Rheometers (MDR) Page
Plastics & Rubber Testing Main Page
For
more information, or to request an E-Quote on our Mooney Viscometer
please E-mail our sales department at: sales@qualitest-inc.com
or call us toll-free at:
1-877-884-TEST.
|
