With
the hand held VX Ultrasonic Velocity gauge, you can determine
material velocities by Measuring a known thickness, entering
a known thickness into the VX, and the material velocity
will be displayed.
The
tool's backlit display is easy to read, even in dim light,
and the unit operates for up to 200 hours on a single set
of batteries.
The
VX comes complete, ready to use and is protected by 5 year
limited warranty.
Applications:
Corrosion & Pitting, Tube & Pipe, Tanks, Boilers,
Glass, and a Variety of other applications
|
Physical
Weight: 10 ounces
Size:
2.5 W x 4.75 H x 1.25 D inches
63.5 W x 120.7 H x 31.8 D mm
Operating
Temperature:
-20 to 120F (-30 to 50C)
Case:
Extruded aluminum body / nickel plated aluminum end caps.
Resistant to impact and environmentally sealed.
Keypad
Sealed
membrane that is resistant to both water and petroleum products.
Six tactile-feedback keys.
Transducer
Dual
element (transmit and receive).
1 to 10 MHz frequency range.
Locking quick disconnect.
Lemo connectors.
4 foot cable.
Custom transducers available for special applications. |
Power
Source
Two 1.5V alkaline or 1.2V NiCad AA cells.
Typically
operates for 200 hours on alkaline and 130 hours on NiCad.
Display
Multi-function
4.5 digit liquid crystal display with 0.500 inch numerals,
backlit for use in poor light conditions.
Measurements
displayed in inches, inches/microsecond, millimeters, and
meters/second.
Bar
graph indicates stability or reading.
Certification
Factory calibration traceable to national standards.
Warranty
5
year limited.
|
Measuring
Range:
Measures
from 0.025 to 19.999 inches (0.63 to 199.99 millimeters)
switch to select English or metric units.
Resolution:
0.001 inch (0.01 millimeter)
Velocity
Range:
.0492 to .3937 in/ms (1250 to 10,000 meters/sec)
Built-in:
Stainless
steel reference disk for probe zeroing.
Four
readings per second for single point measurements or 16
per second in SCAN mode.
Single
and Two point calibration option included.
|
